How To Remove The Drain Filter From A Bosch Nexxt Front Loader

How to make clean the filter in a Bosch washing machine

cleaning the CM Bosch filter The instructions for the washing machine crave the user to clean the trash filter from time to time, but how to make clean the filter in the Bosch washing auto? This procedure is uncomplicated, but has nuances that can confuse a novice user. We decided to give footstep-past-footstep instructions that volition tell you in particular: where to observe the trash filter, how to remove and clean it, and so put information technology in place. If you have recently used a Bosch automatic washing machine, this commodity volition come in handy.

Filter location

If you look closely at the front of the Bosch washing auto housing, you lot will immediately make up one's mind where the drain filter is. In the vast majority of cases, it is located in forepart, in the lower right corner of the typewriter body. In older models, Bosch washers filter was non hidden by the hat and stuck out, now the lid is present in all cases. Depending on the model of the Bosch front-loading automobile, the filter may be located:

Front-loading models also have a drain filter. Information technology is located in forepart of the machine in the lower left corner. They hibernate behind a circular or square door and are removed just similar the filters of front-loading machines.
filter location in SM Bosch_4

Some rare models of Bosch brand washers, released before 2005, do not have garbage filters at all. They simply were not provided by design. On such machines, the snail may get clogged and for cleaning information technology volition accept to remove the lower decorative panel, remove the tray and unhook the pipe. Information technology is possible to access the snail clogged with dirt in a different way, simply this is difficult.

Cleaning

Well, the trash filter has been safely found, you tin can start cleaning. First, we tilt the washing automobile a little back, so that a flat container can be placed in front of the housing for sewage that volition menstruation from the filter snail.

Substitute a small basin.
Open the lid that hides the filter.
On the right we see the filter itself, on the left is a short hose for draining water. We take out the hose a few centimeters and, having pulled the cork out of information technology, bleed the dirty water into a bowl.
Now yous can remove the filter. Nosotros need to unscrew the plug past turning it counterclockwise a few turns.
The rest of the water will cascade into the basin through the pigsty that has formed, and you should inspect the internal surfaces of the niche and the filter itself for dirt and other small things that accidentally become there.
Wipe the filter and the seat with a cloth.
We insert the filter back into the niche and twist it clockwise to the end.
Close the hatch, pull out the bowl and put the motorcar in a stable position.

If the filter does not unscrew?

On nigh Bosch washing motorcar models, the filter tin can be removed without any problems. Simply at that place are times when the filter does not want to exist removed in any way, it seems that it is tightly attached and tin can only be removed with a heavy tool.

Breaking the automobile, picking the filter in front, is not worth it. If information technology is not twisted, endeavour to extract the "arbitrary" part, partially disassembling the Bosch washing automobile, namely removing its forepart wall. By removing the front wall of the housing, we go access to the drain block: two nozzles, the base of the drain hose, a pump and a snail, in which the "arbitrary" trash filter is placed.Nosotros need to commencement de-energize the washing car, loosen the clamps on the nozzles, remove the nozzles and remove the snail along with the filter and pump. Farther we human activity as follows.

filter location in SM Bosch_6

The removed snail is turned fitting upwardly.
Move the pump clockwise until information technology stops.
Squeeze the locking mustache.
Again, plough the pump clockwise and remove it.
Having gained access to the inner cavity of the cochlea, we clean information technology and collect the block back.

In this case, we managed to clean the filter without removing the part itself. And so as not to detach the machine for re-cleaning, soak the cochlea together with the filter in WD-twoscore grease. The thread of the filter volition oxidize, and information technology will twist out easily and naturally.